A Comprehensive Guide to Installing Mosaic Tiles: Applicable Scenarios, Construction Steps and Usage Calculation

Area to Use（Applicable Scenarios）

Kitchen backsplashes and borders, feature walls in bathrooms, bars, cafes, restaurants, etc. Not suitable for high-load areas or areas directly exposed to sunlight, humidity, and heat. 

Special Notes

All construction surfaces must be dry, smooth, clean, and free of dust, grease, and dirt; otherwise, the adhesive effect will be impaired. 

Installation Steps

Positioning & Marking: Use a level and/or pencil to mark a vertical starting line on the wall, ensuring the tiling reference is flat.

Wall Cleaning: Thoroughly clean the construction wall to remove impurities and ensure firm adhesion.

Size Cutting: Cut mosaic self adhesive tiles to the appropriate dimensions according to the decoration area. 

Peel Off Protective Paper: Remove the protective paper layer from the back of the mosaic self adhesive tiles.

Alignment & Pasting: Align the mosaic sheets along the marked line, apply pressure after positioning to enhance adhesive force.

Edge Sealing: Apply silicone to all edges between the mosaic sheets and the wall to complete sealing. 

How to calculate the quantity?  

If you need to pave 3 square meters, the purchase quantity is: paving area 3 ×

consumption per square meter 11 = 33 pieces.  

We recommend purchasing 1-2 extra pieces for construction wastage. 

Conclusion

Mosaic self adhesive tiles can be applied to any smooth, clean, and dry surface - including painted drywall or even existing tiles. Simply peel and stick for effortless installation. All you need are basic tools: a ruler, pencil, cloth, and scissors.

Compared to traditional tiles, Aluminum Metal Mosaic Wall Sticker saves you both time and money. No need to worry about sizing - the mosaic self adhesive tiles can be easily cut to perfectly fit your wall dimensions.